Atlona UHD-EX-100CE-TX-PD 4K/UHD Remote Powered HDMI Over 100 M HDBaseT Transmitter with Ethernet, Control, and PoE
Zoom image

Atlona UHD-EX-100CE-TX-PD 4K/UHD Remote Powered HDMI Over 100 M HDBaseT Transmitter with Ethernet, Control, and PoE

In stock (2 items available)
Request price
Add a different product to compare

Atlona UHD-EX-100CE-TX-PD 4K/UHD Remote Powered HDMI Over 100 M HDBaseT Transmitter with Ethernet, Control, and PoE

  • 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling
  • HDCP 2.2 compliant
  • Supports 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)
  • HDBaseTTM transmitter for HDMI®, Ethernet, power, and control up to 330 feet (100 meters)
  • Remotely powered via PoE (Power over Ethernet)
  • Transmits RS-232, CEC, and Ethernet control signals over HDBaseT
  • Multi-channel audio compliant for all PCM, Dolby®, and DTS® formats

Atlona UHD-EX-100CE-TX-PD 4K/UHD Remote Powered HDMI Over 100 M HDBaseT Transmitter with Ethernet, Control, and PoE

The Atlona AT-UHD-EX-100CE-TX-PD is an HDBaseT transmitter for HDMI transmission up to 330 feet (100 meters) over category cable with Ethernet pass-through and RS-232 control. It transmits video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded multi-channel audio. The AT-UHD-EX-100CE-TX-PD is HDCP 2.2 compliant and supports EDID communication. The transmitter features a quarter rack width metal enclosure for easy rack mounting with rear panel I/O ports for uncluttered wire management. This device is externally powered via Power over Ethernet, and is ideal for use with Atlona switchers with PoE-equipped HDBaseT inputs, including the AT-UHD-CLSO-612ED, AT-UHD-CLSO-840, and AT-UHD-SW-5000ED.

The AT-UHD-EX-100CE-TX-PD transmitter simplifies system design when powered by an Atlona switcher with HDBaseT inputs, reducing cost and complexity by eliminating the need for a power supply. It can also be paired with the AT-UHD-EX-100CE-RX-PSE receiver and AT-HDVS-200-RX scaling receiver, both delivering PoE. Installer-friendly features include a rack-mountable form factor that allows four transmitters to share a single 1U rack tray, and a front mounted USB port for easy firmware updates.

Applications

This transmitter is ideal for use in applications where:

  • HDBaseT transmitters need to be installed in a location where local AC power may not be available, such as a lectern or conference room table
  • 4K/UHD signal extension and HDCP 2.2 compliance are necessary in the system design


FEATURES

4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling

  • Compatible with Ultra High Definition sources and displays
  • Full support of 4K/UHD streaming services and playback devices


HDCP 2.2 compliant

  • Adheres to latest specification for High-bandwidth Digital Content Protection
  • Allows protected content stream to pass between devices


Supports 4K HDR10 @ 24 Hz

  • Extends 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)


Remotely powered via PoE (Power over Ethernet)

  • IEEE 802.3af PoE Powered Device (PD)
  • Power for transmitter is supplied by receiver over HDBaseT
  • Saves time and integration costs


AV, Ethernet, power, and control over HDBaseT

  • Delivers 4K/UHD video, embedded audio, 100Base-T Ethernet, power, and control through a single cable
  • Eliminates multiple cable runs between source, control system, router, and display


Extended distance HDMI extension

  • Transmits HDMI signals up to 330 feet (100 meters) @ 1080p with CAT5e/6 or 4K/UHD using CAT6a/7 cable
  • Uses easy-to-integrate category cable for low-cost, reliable system installation


Extends RS-232, CEC, and Ethernet control signals*

  • Control signals travel over HDBaseT link to device for maximum control system flexibility
  • Simplifies integration of source, control system, and display
  • * The AT-UHD-EX-100CE-TX-PD does not include I/O ports for IR control signals extended over HDBaseT. If IR control over HDBaseT is required, please refer to the AT-UHD-EX-100CE-TX.


Rear panel I/O connectors

  • Placement of ports on rear panel simplifies wire management
  • Saves installation time and eliminates clutter


Multi-channel audio compliant

  • Supports PCM, Dolby Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, DTS-HD Master Audio™, and DTS:X™
  • Allows any multi-channel audio stream to be used within a professional audio system


Field-updatable firmware

  • Front panel USB port provides an easy means for device updates
  • Ensures long-term system return on investment


Front panel Power and Link status LEDs

  • LED indicators provide power and HDBaseT link status information
  • Provides easy setup and troubleshooting


Low-profile, 1 inch (25 mm) high quarter rack-width enclosure

  • Easy installation into racks and confined spaces
  • Keeps devices out-of-sight when placed in public spaces


Included accessories

  • User guide, mounting brackets


Award-winning 10 year limited product warranty

  • Ensures long-term product reliability and performance in residential and commercial systems
  • Specify, purchase, and install with confidence
    • Weight
      2 lbs
    • SKU
      AT-UHD-EX-100CE-TX-PD
  • Manufacturer
    Atlona