The Atlona AT-UHD-EX-100CE-KIT is an HDBaseT transmitter/receiver kit for HDMI transmission up to 330 feet (100 meters) over category cable with Ethernet pass through, RS-232 and IR control, plus Power over Ethernet. This extender kit transmits video signals up to 4K/UHD @ 60Hz with embedded multi-channel audio and remote 48V power for the receiver. Additionally, the kit extends Ethernet, RS-232, and 12 volt-based IR control commands. The kit is HDCP 2.2 compliant and supports EDID communication. Both transmitter and receiver feature quarter rack width metal enclosures for easy rack mounting with rear panel I/O ports for uncluttered wire management.  Use with an optional AT-IR-CS-RX IR receiver cable to capture IR remote commands for AV system control.

The AT-UHD-EX-100CE-KIT provides integrator-friendly features including: IEEE standards based PoE transmission for safety and compatibility; compliant with HDCP 2.2 to meet the latest copy protection requirements; an integrator-friendly form factor with rear panel HDBaseT, HDMI, control and power connections; a rack- mountable form factor that allows for four transmitters to share a single, 1U rack tray; power chaining to allow multiple sets to be powered from one power supply; and a front mounted USB port for easy firmware updates.

FEATURES
4K/UHD capability

Compatible with Ultra High Definition sources and displays
Full support of 4K/UHD streaming services and playback devices
HDCP 2.2 compliant

Adheres to latest specification for High-bandwidth Digital Content Protection
Allows protected content stream to pass between devices
Supports 4K HDR10 @ 24 Hz

Extends 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)
Remote-powered receiver

Industry standard IEEE 802.3af PoE for receiver is supplied by transmitter over HDBaseT
Saves time and integration costs
Extended distance HDMI extension

Transmits HDMI signals up to 330 ft (100m) @ 1080P with CAT5e/6 or 4K/UHD using CAT6a/7 cable
Uses easy-to-integrate category cable for low-cost, reliable system installation
AV, Ethernet, power, and control over HDBaseT

Delivers 4K/UHD video, audio, 100Base-T Ethernet, power, and control through a single cable
Eliminates multiple cable runs between source, control system, router, and display
Rear panel I/O connectors

Placement of ports on rear panel simplifies wire management
Saves installation time and eliminates clutter
Multi-channel audio compliant

Supports PCM, Dolby Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, DTS-HD Master Audio™, DTS:X™
Allows any multi-channel audio stream to be used within a professional audio system
Field updatable firmware

Front panel USB port provides an easy means for kit upgrades
Ensures long term system return on investment
Front panel Power and Link status LEDs

LED indicators provide power and HDBaseT link status information
Provides easy setup and troubleshooting
Power chaining

Included power supply provides ample power for up to three Atlona HDBaseT extenders
Four Atlona HDBaseT extenders can be powered using the optional AT-PS-483125-C power supply
Reduces clutter from multiple power supplies in equipment racks
Low-profile, 1 inch (2.5 cm) high quarter rack-width enclosure

Easy installation into racks and confined spaces behind displays
Keeps devices out-of-sight when placed in public spaces
Included accessories

User guide, desktop power supply for transmitter, detachable power cable, IR emitter P/N AT-IR-CS-TX, mounting brackets
Award-winning 10 year limited product warranty

Ensures long-term product reliability and performance in residential and commercial systems
Specify, purchase, and install with confidence