|
|
|
Atlona DVI60SRS Passive DVI Extenders Over Single Cat5/6/7
Atlona DVI60SRS Passive DVI Extenders Over Single Cat5/6/7
The AT-DVI60SRS is one of the first DVI extenders on the market to not only provide increased distance when connecting to a display or source, but it is also EDID compliant. This DVI extender gives the user and option to use Cat 5/6/7 on projects instead of a standard DVI cable. With the benefit of being passive the AT-DVI60SRS can provide excellent signal quality without amplification (Sender/Receiver Included).
The AT-DVI60SRS is a DVI Passive Extender kit that allows to extend high resolution DVI digital signals great distances. The DVI60SRS can transmit resolution such as 1920×1200 up to 160ft away or 1024×768 up to 180ft. With AT-DVI60SRS, users can send high quality digital video from DVI enabled PC/Laptop through single cost effective Cat5, Cat6 or Cat7 cable to the remote monitor or projector, instead of using short and expensive DVI cables.
The AT-DVI60SRS includes one transmitter and one receiver units. The transmitting unit is connected to your PC DVI output and the receiving unit is connected to the monitor or projector. The transmission distance between the transmitting and receiving units can be up to 50m (160ft) at resolutions up to 1920×1200 or 55m (180ft) at resolutions up to 1024×768. With compact size and requiring no power, AT-DVI60SRS is the most cost effective choice for bringing your impressive digital video to the remote display.
Features:
DVI 1.1 compliant
Extend the transmission length 50m (160ft) at resolutions up to 1920×1200 or 55m (180ft) at resolutions up to 1024×768
Easy to install
No power required (passive)
Compact size
Direct plug-in
Capable of using CAT5/6/7 (568B Termination for optimal results)
Network Traffic LEDS (denotes active network traffic)