Video Switchers, Extenders & Converters

Atlona IR-CS-TX IR Emitter Cable for UHD-EX Extenders and UHD-PRO3 Matrixes

• IR Emitter designed for Atlona UHD-PRO3 Series matrix switchers and UHD-EX Series extenders
• Red status LED provides positive indication that emitter is operational and transmitting
• Two-pin conductor cable with stripped ends; Signal and Ground conductors
• Length: 6.6 ft. (2 m)
• Includes IR cover to prevent interference from other IR devices

Atlona HDVS-TX-WP-NB Blank Face Plate for HDVS Series Wall Plate Switchers

• US, Two-gang replacement faceplate
• Eliminates control buttons

Atlona IR-CS-RX IR Receiver Cable for PoE Extenders

• IR Receiver designed for Atlona UHD-EX Series extenders
• Uses standard, 12 volt-based system
• Red status LED provides positive indication that the receiver is capturing a signal from the IR remote control
• Three-pin conductor cable with stripped ends; Signal, Ground, and Power conductors
• Length: 6.6 ft. (2 m)
• Self-adhesive backing

Heavy duty, 1U rack shelf
Required accessory for installation of GainTM 120 power amplifiers in an equipment rack
Also ideal for side-by-side rack installation of many other Atlona products

Atlona AD2 Optical/Digital Coaxial 2-Way Converter

Atlona’s AT-AD2 Toslink/Coaxial Audio converter is a great little gadget for those who need to convert optical to coaxial or coaxial to optical or even input a single optical or coaxial and get both outputs working simultaneously.

Tabletop cable access enclosure with under-table cable management system
Provides quick and easy access to AV cables for meeting participants
Supplied insert holds three cables in place with connectors easily accessible
Low-profile design for any modern or traditional décor
Convenient under-table bag conceals cables for a clean, professional installation

Atlona PS-POE Power Over Ethernet Mid-Span Power Supply

• Power supply for remote powering for powered devices on HDBaseTTM transmission lines
• Mid-span power supply
• Power switches for incoming and outgoing line
• Supports 4K/UHD signals
• Upgrade for PoCc systems
• Low-profile, discreet enclosure

Converting and scaling composite video (BNC) signal to HD Displays becomes as simple as ‘plug and play’ with the AT-HD120. Includes a built in scaler and on screen control for output resolution options. Selectable resolutions available up to 1080p or 1600×1200.

Atlona HD420 HDMI to VGA/Component and Stereo Audio Format Converter

• The Atlona AT-HD420 converts HDMI to a VGA or component output plus stereo audio. It enables an HDMI source to connect to a PC monitor, Projector or TV. Its high bandwidth capability supports a wide range of PC monitor and HDTV resolutions up to 1920 X 1200 or 1080p.
  Use with the Atlona USB to 5V DC Power Cable to power your product. Plug directly into your TV or PC and lose the wall plug.

Etude™ Sync

EDID emulation and management for HDMI® signals
5 Volt and Hot Plug Detect emulation for HDMI source and sink communications
Detects and resolves issues associated with signal handshaking between source and destination devices
4K/UHD capability @ 60 Hz with 4:4:4 chroma sampling, plus support for HDR formats
HDCP 2.2 compliant

Atlona DVI60SRS Passive DVI Extenders Over Single Cat5/6/7

The AT-DVI60SRS is one of the first DVI extenders on the market to not only provide increased distance when connecting to a display or source, but it is also EDID compliant. This DVI extender gives the user and option to use Cat 5/6/7 on projects instead of a standard DVI cable. With the benefit of being passive the AT-DVI60SRS can provide excellent signal quality without amplification (Sender/Receiver Included).

The AT-HD550 is a great solution for any multiple HDMI ready display set up. Display the range of different TV’s without the hassle of trying to manage different resolutions.

Atlona HD610 DVI with Analog/Digital Audio to HDMI Converter and Embedder (Discontinued)

The Atlona AT-HD610 will allow you to take a DVI, 3.5mm Audio, and/or a SPDIF audio connection and embed them into a single HDMI cable. This allows for easy integration of audio and video from a computer to a display or audio receiver. The mounting brackets allow for easy installation in a rack or standard mounting to a surface.

Features:

• We use Silicon image chip-sets in our units for the best compatibility with 99.99%of the AV gear available
• EDID Learning mode for resolving EDID issues
• HDCP compliant
• Allows embedding of DVI and audio onto a single HDMI line
• Compact size and mounting brackets allow for easy installation
• SPIDF and 3.5mm jack for analog audio input
• Easily connect your PC to your home theater setup
• Supports resolutions: up to 1080p or 1920×1200

Atlona UHD-EX-70C-RX 4K/UHD HDMI Over HDBaseT Receiver with Control and PoE

• 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling
• HDCP 2.2 compliant
• Supports 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)
• HDBaseTTM receiver for HDMI®, power, and control up to 230 feet (70 meters)
• Remotely powered via PoE (Power over Ethernet)
• Receives RS-232, IR, and CEC control signals over HDBaseT
• Multi-channel audio compliant for all PCM, Dolby®, and DTS® formats

Atlona HD570 HDMI Audio De-Embedder with 3D Support

• The Atlona AT-HD570 is a professional quality HDMI Audio de-embedder.  Input an HDMI signal to the HD570 and it de-embeds the audio signal to either Optical or Multi-Channel analog audio outputs.  This audio de-embedder supports uncompressed analog LPCM 7.1, 5.1, 2ch through the multi-channel analog outputs. On the optical output it supports Dolby Digital, LPCM 2CH and DTS signals. Dolby TrueHD and DTS-HD Master Audio pass through HDMI connection without being de-embedded.

Atlona UHD-EX-70C-TX 4K/UHD HDMI Over HDBaseT Transmitter with Control and PoE

4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling
HDCP 2.2 compliant
Supports 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)
HDBaseTTM transmitter for HDMI®, power, and control up to 230 feet (70 meters)
Local AC powering – PoE (Power over Ethernet) source
Transmits RS-232, IR, and CEC control signals over HDBaseT
Multi-channel audio compliant for all PCM, Dolby®, and DTS® formats

AT-UHD-EX-70-2PS

4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling
HDCP 2.2 compliant
Supports 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)
HDBaseTTM extender kit for HDMI® up to 230 feet (70 meters)
Multi-channel audio compliant for all PCM, Dolby®, and DTS® formats

Atlona Rondo 442 4K HDR Two-Output HDMI Distribution Amplifier

• 1×2 HDMI® distribution amplifier
• 4K/UHD capability @ 60 Hz with 4:4:4 chroma sampling, plus support for HDR formats
• HDCP 2.2 compliant
• EDID management
• Supports cascading up to eight units

Atlona HD530 HDMI/DVI to Composite and S-Video Down-Converter

• The Atlona AT-HD530 is designed to down-convert HDMI or DVI digital signal from PC, Mac, GPS System, Camcorder or Video Game to Analog S-Video or Composite Video with Audio. The AT-HD530 is featured with HDMI/DVI loop-out.
• Use with the Atlona USB to 5V DC Power Cable to power your product. Plug directly into your TV or PC and lose the wall plug.

Atlona AT-HDRX-RSNET HDMI Over HDBaseT Receiver with Ethernet, RS-232, and IR

The Atlona AT-HDRX-RSNET is an HDBaseTTM receiver for HDMI transmission over category cable with Ethernet, RS-232, and bi-directional IR control. It extends 1080p/60Hz and 4K/UHD video with embedded multi-channel audio and control signals up to 328 feet (100 meters). Built-in Ethernet extension allows streaming media on your TV. The receiver is remotely powered from compatible Atlona transmitters using Power over Category cable (PoCc) to clean up the installation behind displays. AT-HDRX-RSNET is ideal for larger meeting rooms, educational settings, and residential environments that need complete control over HDBaseT.