The Atlona 4K-HDVS-EXT is an HDBaseT transmitter and receiver combination that delivers a complete integration solution with 4K/UHD extension, automatic HDMI and VGA input switching, and automatic display control. It includes the AT-HDVS-200-TX three-input HDBaseT switcher and AT-UHD-EX-100CE-RX-PSE HDBaseT receiver. The 4K-HDVS-EXT extends HDMI up to 330 feet (100 meters) over category cable with Ethernet pass-through and control. This HDBaseT extender solution supports video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded multi-channel audio.

The transmitter is remotely powered by the receiver via Power over Ethernet. This makes the 4K-HDVS-EXT ideal for applications in which the transmitter needs to be installed in a location where local AC power may not be available, such as a lectern or conference room table.

For your convenience, the 4K-HDVS-EXT part number makes it quick and easy to purchase the AT-HDVS-200-TX and AT-UHD-EX-100CE-RX-PSE in a single step. Both products will appear as individual line items in your order, and will be shipped in their individual packaging.

FEATURES
3×1 HDBaseT switcher

Features two HDMI inputs plus a VGA input with audio
Allows advanced HDMI display devices to be used with legacy VGA sources
Audio input can be assigned to any of the video inputs
Audio-only playback available without video signal present
4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling

Compatible with HDMI sources up to 4K/60 4:2:0 and 4K/30 4:4:4
Supports high resolution applications such as CAD, 3D visualization, desktop publishing, and detailed financial reporting
HDCP 1.4 compliant

Adheres to version 1.4 specification for High-bandwidth Digital Content Protection
Allows protected content stream to pass between devices
Extended distance HDMI extension

Transmits AV, control, and Ethernet up to 330 feet (100 meters) @ 1080p with CAT5e/6 or 4K/UHD using CAT6a/7 cable
Uses easy-to-integrate category cable for low-cost, reliable system installation
Automatic Display Control

Automatically changes display power state based on active or standby mode of the switcher. Control signals to display are transmitted via IP, RS-232, or CEC.
Enables display and volume control. CEC enables control of consumer displays.
Eliminates the need for a complex AV control system
Automatic input selection using hot plug detect and video detection technology

Selects active input when sources are connected or if there is a change in source power status
Enables simplified, automatic system operation with no user intervention necessary
Transmitter powered by receiver via PoE (Power over Ethernet)

Power for transmitter is supplied by receiver over HDBaseT
Allows convenient transmitter installation at a lectern or conference table without the need for local AC power